Workshop Procedures

$60.00

This 2-hour video is filled with unusual workshop tooling & techniques. Learn eight ways to index a lathe, including CNC. Learn how to make index plates from scratch. See the cutting of internal and external teeth on a ring gear of 4.5 ” ID and 5.5 ” OD. Watch concave and convex turning on a standard non-CNC bench lathe. See how easily a damascene pattern can be created on a surface with the simplest of tooling.

Category:

Description

This 2-hour video is filled with unusual workshop tooling & techniques. Learn eight ways to index a lathe, including CNC. Learn how to make index plates from scratch. See the cutting of internal and external teeth on a ring gear of 4.5 ” ID and 5.5 ” OD. Watch concave and convex turning on a standard non-CNC bench lathe. See how easily a damascene pattern can be created on a surface with the simplest of tooling. Watch how a lathe can be used to remove and replace in-barrel, heavy duty mainsprings. Learn a simple way to remove lantern pinion pins and replace them without the purchase of special tools. Watch the use of a complete Sherline headstock assembly mounted at lathe center height for radial drilling See it being used as a vertical mill, or being used for cutting gear teeth. Watch a 19.1″ OD Masonite disk being machined on a 7″ Myford Super 7B lathe! Learn a simple method for the end to end transfer of circumferential spacing on cylinders. See how easily the direction of rotation of a sewing machine motor can be reversed. Watch the replacing of a broken pivot. See three mainspring length gages, each of which can indicate the correct length of an in-barrel spring without measurements or calculations. Watch the use of the ingenious McDuffIe drive system being used for powering live spindles on the bench lathe. This extremely detailed video is a remarkable source of information for the serious craftsman—clockmaker, modelmaker or machinist.

Reviews

There are no reviews yet.

Be the first to review “Workshop Procedures”

Your email address will not be published. Required fields are marked *